BKDCN - VORTEX BTYL212

  • MSDS: BKDCN
  • Manufacturer: VORTEX LAB INC
  • Product Name: VORTEX BTYL212
  • National Stock Number: 6810-00F015381
Product Identification

Product ID:VORTEX BTYL212
MSDS Date:08/16/1989
FSC:6810
NIIN:00F015381
MSDS Number: BKDCN

Responsible Party
VORTEX LAB INC
2079 SOUTH 81ST STREET
MILWAUKEE, WI 53219

Emergency Phone: (414) 321-6363

Info Phone: (414) 321-6363

Cage: FO794

Contractor
VORTEX LAB INC
MILWAUKEE, WI 53219

Telephone: (414) 321-6363

Cage: FO794

Ingredients

SODIUM HYDROXIDE (SARA III)

CAS: 1310-73-2

RTECS: WB4900000

Fraction By Weight: <15%

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: NAUSEA, VOMITING. SKIN:
SEVERE IRRITATION/BURNS. INHALATION: NOSE/THROAT BURNS, LUNG
INFLAMMATION & PULMONARY EDEMA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: NAUSEA, VOMITING. SKIN: SEVERE
IRRITATION/BURNS. INHALATION: NOSE/THROAT BURNS, LUNG INFLAMMATION
& PULMONARY EDEMA.

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/PLENTY OF WATER. INHALATION: REMOVE TO FRESH AIR. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Extinguishing Media:USE WATER FOG, DRY CHEMICAL, CO2, OR MECHANICAL
FOAM. WATER SPRAY MAY SCATTER FIRE.
Fire Fighting Procedures:NO SPECIAL REQUIREMENTS
Unusual Fire/Explosion Hazard:NON-FLAMMABLE CORROSIVE LIQUID.

Accidental Release

Spill Release Procedures:CONTAIN SPILL, PLACE INTO DRUMS FOR PROPER
DISPOSAL. NEUTRALIZE RESIDUE W/DILUTE ACID, FLUSH W/WATER FOLLOWED
BY A LIBERAL COVERING OF SODIUM BICARBONATE.
Neutralizing Agent:DILUTE ACID FOLLOWED BY SODIUM BICARBONATE.

Handling

Handling and Storage Precautions:STORE IN A COOL, WELL-VENTILATED AREA
AWAY FROM ALL SOURCES OF IGNITION.
Other Precautions:CORROSIVE LIQUID.

Exposure Controls

Ventilation:USE W/ADEQUATE VENTILATION
Protective Gloves:RUBBER
Eye Protection:GOGGLES, FACESHIELD
Other Protective Equipment:BOOTS & APRONS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHNG BEFORE
REUSE.
Supplemental Safety and Health

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:32F
Vapor Pres:<1
Spec Gravity:1.25-1.5
pH:>13
Solubility in Water:COMPLETE
Appearance and Odor:DARK BROWN; SLIGHT ORGANIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS
Stability Condition to Avoid:SOURCES OF IGNITION

Disposal

Waste Disposal Methods:OBSERVE ALL LOCAL, STATE, & FEDERAL REGULATIONS.
CORROSIVE LIQUID.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.